| Permeate Flow SWC4 MAX: | 7,200 gpd (27.3 m3/d) |
| Salt Rejection SWC4 MAX: | 99.8% (99.7% minimum) |
| Test Conditions SWC4 MAX: | 32000 ppm NaCl solution |
| 800 psig (5.5 MPa) Applied Pressure | |
| 77 °F (25 °C) Operating Temperature | |
| 10% Permeate Recovery | |
| 6.5 - 7.0 pH Range |
The Specified Performance is based on data taken after a minimum of 10 minutes of operation. Actual testing of elements may be done at conditions which vary from these exact values; in which case, the performance is normalized back to these standard conditions. Permeate flow for individual elements may vary ±15 percent from the value specified.
| Configuration SWC4 MAX: | Spiral Wound |
| Membrane Polymer SWC4 MAX: | Composite Polyamide |
| Membrane Active Area SWC4 MAX: | 440 ft2 (40.9 m2) |
Packaging: All membrane elements are supplied with a brine seal, interconnector, and O-rings. Elements are enclosed in a sealed polyethylene bag containing less than 1.0% sodium meta-bisulfite solution, and then packaged in a cardboard box.
| Maximum Applied Pressure: | 1200 psig (8.27 MPa) |
| Maximum Chlorine Concentration: | < 0.1 ppm |
| Maximum Operating Temperature: | 113 °F (45 °C) |
| pH Range, Continuous (Cleaning): | 2-11 (1 -13) |
| Maximum Feedwater Turbidity: | 1.0 NTU |
| Maximum Feedwater SDI (15 mins): | 5.0 |
| Maximum Feed Flow: | 75 gpm (17.0 m3/h) |
| Minimum Brine Flow: | 12 gpm (2.7.0 m3/h) |
| Maximum Pressure Drop for Each Element: | 15 psi (0.10 MPa) |
HED GROUP JOINT STOCK COMPANY
.png)
Head Office: 92B Tay Son Street., Phu Tho Hoa Ward, Ho Chi Minh City.
.png)
Phone: (+84) 931 83 83 85
.png)
Email: vi.ntt@hedgroup.vn
