| Permeate Flow LFC3-LD | 11 ,000 gpd (41 .6 m3/d) |
| Salt Rejection LFC3-LD | 99.7% (99.5% minimum) |
| Test Conditions LFC3-LD | 1,500 ppm NaCl solution |
| 225 psig (1.55 MPa) Applied Pressure | |
| 77 °F (25 °C) Operating Temperature | |
| 15% Permeate Recovery | |
| 6.5 - 7.0 pH Range |
The Specified Performance is based on data taken after a minimum of 10 minutes of operation. Actual testing of elements may be done at conditions which vary from these exact values; in which case, the performance is normalized back to these standard conditions. Permeate flow for individual elements may vary ±15 percent from the value specified.
| Configuration LFC3-LD | Low Fouling Spiral Wound |
| Membrane Polymer LFC3-LD | Composite Polyamide |
| Neutrally Charged Surface | |
| Membrane Active Area LFC3-LD | 400 ft2 (37.2 m2) |
| Feed Spacer: | 34 mil (0.86 mm) |
The Specified Performance is based on data taken after a minimum of 10 minutes of operation. Actual testing of elements may be done at conditions which vary from these exact values; in which case, the performance is normalized back to these standard conditions. Permeate flow for individual elements may vary ±15 percent from the value specified.
| Maximum Applied Pressure: | 600 psig (4.14 MPa) |
| Maximum Chlorine Concentration: | < 0.1 ppm |
| Maximum Operating Temperature: | 113 °F (45 °C) |
| pH Range, Continuous (Cleaning): | 2-10 (1 -12) |
| Maximum Feedwater Turbidity: | 1.0 NTU |
| Maximum Feedwater SDI (15 mins): | 5.0 |
| Maximum Feed Flow: | 85 gpm (19.3 m3/h) |
| Minimum Brine Flow: | 12 gpm (2.7 m3/h) |
| Maximum Pressure Drop for Each Element: | 15 psi (0.10 MPa) |
HED GROUP JOINT STOCK COMPANY
Head Office: 92B Tay Son Street., Phu Tho Hoa Ward, Ho Chi Minh City.
Phone: (+84) 931 83 83 85
Email: vi.ntt@hedgroup.vn
